Gasket Gum-Permatex-Ultra Grey-99g Gasket Gum-Permatex-Ultra Grey-99g

100% Original Permatex Gasket Gum

Directions:

1. For best results, surfaces should be clean.

2. Cut nozzle and apply a countinuous 1/16"to 1/4"(2 to 6mm) bead of silicone to one surface. Surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighern unil material begins to squeeze our aroud flange.

3. Let dry for one hour then tighten to torque specifications.

4. Allow 24 hours to fully cure before filing with fluids or returning to service.

5. Replace cap after use.

Reminder: NOT recommended for use on head gaskets or parts in contact with gasoline.